The configuration of the printer system Because there are thousands of paint products of the company, in order to meet the production needs, the company has introduced three production lines for inkjet printer system control printing. Each production line is equipped with two inkjet printers and one conveyor belt. According to the actual working conditions, some necessary attachments are added to make the system work efficiently and smoothly. The Model 3940 printer is a computer-programmed, non-contact inkjet printer whose main principle is to apply a pressure of about 3100E105Pa to the ink through a pressure pump, which is injected through a 60Lm aperture and is applied by a crystal oscillator attached to the gun. The emitted ink line is split into ink lines of fixed frequency, same size and equal distance, and then the ink line is charged by the charging electrode, and the amount of electricity is controlled by the computer CPU board. Then, the detection electrode detects whether the electrical point and phase of the ink dot are correct. Finally, the charged ink dot is offset by the electric field (generated by the upper and lower deflection plates with a voltage of 3kV), and is printed on the article and is not charged. The ink is recycled to the ink tank for recycling through the recovery tank.
The company's products need to print a lot of content, combined with the limitations of the size and shape of the paint cans, one inkjet printer system is equipped with two inkjet printers, 1# machine printing product model, name, 2# machine printing net content , date of manufacture, batch, standard number, certificate, etc. The conveyor belt adopts all stainless steel and advanced frequency conversion stepless speed regulation technology to make the tank conveyance smooth and consistent. According to the packaging cans of different sizes and sizes, with the printing effect of the printer, pre-commissioning and setting the corresponding conveying speed, the relationship between the speed and the deformation coefficient of the printing. Auxiliary device UPS500W: The analog board integrated circuit and CPU control board of the printer are highly demanding, and the voltage fluctuation must not exceed 5%. Therefore, each printer is equipped with a UPS500W uninterrupted power supply. Dedicated ground wire: When the printer is printing, a high voltage of 6kV will be generated in the spray gun. A special set of ground wire is set in the system and connected to the outer casing of the machine to effectively prevent high voltage leakage and static electricity. The printer prints into a word that the charged ink dots are offset by the electric field, so the Chinese characters are composed of lattices.
Long Jumpsuit,Short Sleeve Jumpsuit,One Sleeve Jumpsuit,Black Long Sleeve Jumpsuit
Fan Fashion Garments CO,LTD , https://www.viatwinkle.com